Snow and rain cover TUISKU-VU

TUISKU-VU is a snow and rain cover to prevent snow and water from entering intake air vents.

Select the right size louvre by airflow

Downloadable materials

TUISKU installation flush mounted (pdf – 2 MB)

Tuisku.X-plugin Download Fact sheet

Download Fact sheet

Description

TUISKU-VU is a flush mounted snow and rain cover with horizontal vanes. The horizontal vanes give an architecturally pleasing appearance without compromising robust structure and good airflow.

Tuisku materials:

Galvanized steel (ZnFe)
Painted (Ma)
Stainless (RFe)
Acid resistant (HFe)
Sheet copper (Cu)

The surface treatment of TUISKU fulfills the corrosivity category C4 that lasts well in even the most challenging climate conditions.

Individually dimensioned (non-standard) sizes are possible. Please confirm the available size options from Climecon’s technical support.

Note:

TUISKU has an inclined bottom and water runs out from the front of the louver. In TUISKU-PU and TUISKU-VU air intake is executed from the front surface of the louver.

The recommended face air velocity is 0,7 m/s.

While placing the louver consider:

minimal effect of wind
do not place the device near complex constructs or surfaces where snow is easily built-up

Product code

TUISKU

–

1000×1000

–

ZnFe

–

RR40

–

KLV

–

800×800

1 = Product
2 = VU = Horizontal vanes, flush-mounted model
PS = Vertical vanes, with side vanes, surface model
P = Vertical vanes, no side vanes, surface model
V = Horizontal vanes, no side vanes, surface model
VS = Horizontal vanes, with side vanes, surface model
PU = Vertical vanes, flush-mounted model
3 = Size (L x H) mm
4 =Material
ZnFe galvanized steel
RFe stainless steel
HFe acid resistant steel
Cu sheet copper
5 = Installation frame
6 = Painting
7 = Colour according to RR or RAL colour chart
8 = Rear connection, Note! only flush-mounted models
9 = Rear connection size (A x B) mm, defined by designer