TUISKU-VU is a flush mounted snow and rain cover with horizontal vanes. The horizontal vanes give an architecturally pleasing appearance without compromising robust structure and good airflow.

Tuisku materials:

• Galvanized steel (ZnFe)
• Painted (Ma)
• Stainless (RFe)
• Acid resistant (HFe)
• Sheet copper (Cu)

The surface treatment of TUISKU fulfills the corrosivity category C4 that lasts well in even the most challenging climate conditions.

Individually dimensioned (non-standard) sizes are possible. Please confirm the available size options from Climecon’s technical support.

Note:

TUISKU has an inclined bottom and water runs out from the front of the louver. In TUISKU-PU and TUISKU-VU air intake is executed from the front surface of the louver.

The recommended face air velocity is 0,7 m/s.

While placing the louver consider:

• minimal effect of wind
• do not place the device near complex constructs or surfaces where snow is easily built-up

1 = Product
2 = VU = Horizontal vanes, flush-mounted model
PS = Vertical vanes, with side vanes, surface model
P = Vertical vanes, no side vanes, surface model
V = Horizontal vanes, no side vanes, surface model
VS = Horizontal vanes, with side vanes, surface model
PU = Vertical vanes, flush-mounted model
3 = Size (L x H) mm
4 =Material
ZnFe  galvanized steel
RFe stainless steel
HFe acid resistant steel
Cu sheet copper
5 = Installation frame
6 = Painting
7 = Colour according to RR or RAL colour chart
8 = Rear connection, Note! only flush-mounted models
9 = Rear connection size (A x B) mm, defined by designer

See dimensions on Tuisku.X.

Tuisku.X

The smallest available special size or special scale of the TUISKU snow cover is 300×400 mm.

TUISKU-VU-1000

TUISKU-VU-1200

TUISKU-VU-1400

TUISKU-VU-1600

TUISKU-VU-1800

TUISKU-VU-2000

TUISKU-VU-2200