UPA exhaust nozzle - Climecon - Smart ventilation solutions for indoor climate


UPA exhaust nozzle UPA exhaust nozzle is intended for systems where waste air is blown out through a wall surface. UPA is suitable for 15-2300 l/s airflows and is available with a mixing frame that makes the installation of the product quick and easy. Surface treatment Corrosivity category C4 Color options RAL9023+9007 steel grey Description The exhaust air is blown out with a very long and narrow throw pattern so that the exhaust air will not get mixed with fresh air. This will not cause moisture or odour problems if the nozzle opening protrudes from the wall surface and the exhaust velocity is sufficient. This, of course, requires that the exhaust is not directed into shafts or closed inner yards. Waste air exhaust through a wall always requires permission from the building authorities. Properties: Suitable for 15-2300 l/s airflows For buildings with waste air exhaust through a wall Standard colour steel grey RAL9023+9007 Available with a fixing frame that makes installation easier Quick selection guide Dimensions Note! Attachment frame (on the top of the arrows) UPA-800 Selection diagrams UPA-T-125 UPA-125 UPA-160 UPA-200 UPA-250 UPA-315 UPA-400 UPA-500 UPA-630 UPA-800 Throw pattern Throw lengths UPA-T-125 L_0,5> 3m UPA-125 L_0,5> 3m UPA-160 L_0,5> 3m UPA-200 L_0,5> 3m UPA-250 L_0,5> 3m UPA-315 L_0,5> 3m UPA-400 L_0,5> 3m UPA-500 L_0,5> 3m UPA-630 L_0,5> 3m UPA-800 UPA installation 1. Glue sealing compound between UPA nozzle and duct 2. Insulation, ie. 19 mm cellular rubber 3. Sealing compound, ie. SoudaFlex 4. Cover frame 5. Minimum distance 30mm Insulated UPA installation 1. Insulation, ie. 19 mm cellular rubber 2. Sealing compound, ie. SoudaFlex 3. Cover frame 4. Minimum distance 30mm 5. Rubber insulation Calculated exhaust air velocity UPA-T-125 L_0,5> 3m UPA-125 L_0,5> 3m UPA-160 L_0,5> 3m UPA-200 L_0,5> 3m UPA-250 L_0,5> 3m UPA-315 L_0,5> 3m UPA-400 L_0,5> 3m UPA-500 L_0,5> 3m UPA-630 L_0,5> 3m UPA-800