TUISKU-PU snow and rain cover

TUISKU-PU is a snow and rain cover designed to prevent snow and water from entering intake air vents.

Direction of vanes

Vertical vanes

Installation method

Flush mounting

Surface treatment

Corrosivity category C4

Material

Galvanized steel + painting, Marine aluminium + painting, Stainless steel + painting, Acid resistant steel + painting, Corten steel, Copper, Brass

Description

TUISKU-PU is a flush mounted snow and rain cover with vertical vanes.

Materials:

Galvanized steel (ZnFe)
Painted (Ma)
Stainless (RFe)
Acid resistant (HFe)
Sheet copper (Cu)

Individually dimensioned (non-standard) sizes are possible. Please check from Climecon’s technical support.

The surface treatment of TUISKU fulfills the corrosivity category C4 that lasts well in even the most challenging climate conditions.

Note:

TUISKU has an inclined bottom and water runs out from the front of the louver. In TUISKU-PU and TUISKU-VU air intake is executed from the front surface of the louver.

The recommended face air velocity is 0,7 m/s.

While placing the louver consider:

minimal effect of wind
do not place the device near complex constructs or surfaces where snow is easily built-up

100% water insulation

Air flow		Water flow				Results
q_v	v	q_r	q_d	q_ro	q_do	E	Class
m³/s	m/s	l/h	l/h	(l/h)/m²	(l/h)/m²	%
0.00	0.00	48.00	0.000	75.00	0.000	100.00	A
0.64	1.00	48.00	0.000	75.00	0.000	100.00	A
1.28	2.00	48.00	0.000	75.00	0.000	100.00	A

q_v Air flow, dm³/s
v Face velocity
q_rWater flow, l/h
q_ro Water flow, l/h
q_dWater entered, (l/h)/m²
q_do Water entered, (l/h)/m²
E Water separation rate, %

Product code

TUISKU

–

1000×1000

–

ZnFe

–

RR40

–

KLV

–

800×800

1 = Product
2 = PU = Vertical vanes, flush-mounted model
P = Vertical vanes, no side vanes, surface model
PS = Vertical vanes, with side vanes, surface model
V = Horizontal vanes, no side vanes, surface model
VS = Horizontal vanes, with side vanes, surface model
VU = Horizontal vanes, flush-mounted model
3 = Size (L x H) mm
4 =Material
ZnFe galvanized steel
RFe stainless steel
HFe acid resistant steel
Cu sheet copper
5 = Installation frame
6 = Painting
7 = Colour according to RR or RAL colour chart
8 = Rear connection, Note! only flush-mounted models
9 = Rear connection size (A x B) mm, defined by designer

TUISKU-PU Dimensions

See dimensions on Tuisku.X.

Tuisku.X

The smallest available special size or special scale of the TUISKU snow cover is 300×400 mm.

Dimensioning

See graphs on Tuisku.X.

Tuisku.X