MyAir valve
MyAir valveMyAir exhaust air valves are a crucial part of MyAir intelligent ventilation system. They measure the indoor atmosphere and control pressure differences throughout the entire building block. Duct sizesØ 100-125 mm Installation methodSurface mounting JännitelähdeAA battery or power supply 7-15 VDC Demand controlled ventilationYes DescriptionMyAir exhaust air valves are a crucial part of MyAir smart ventilation system. The valves are equipped with sensors that measure from the air:
Demand-controlled ventilationThe operation of the MyAir ventilation system is based on intelligent exhaust air valves. MyAir offers residential apartment buildings intelligent and demand-controlled ventilation by automatically adjusting the ventilation according to the rhythm of living. The system uses wireless data transmission. The measurement data is collected in a cloud service, from where it is available using the user interface. Features:
Battery or power supplyThere are two versions of the MyAir valves, a battery-operated version, and an electric supply version. Depending on the site’s requirements and preferences, either can be chosen for the property. Both versions of the MyAir valve are suitable for all exhaust ventilation systems. Data transmission for both electric supply valves and battery-operated valves is wireless and uses the LoRaWAN radio network. Power supply version for large sitesThe electric supply version has been found to be especially useful in large sites where several smart valves are in use and you want to avoid changing batteries. 7-15 VDC voltage runs through electrically operated MyAir valves. There are several transformers on the market for this. The battery-operated valve does not require cablingWhen installing the MyAir system, cabling is avoided if battery-operated MyAir valves are used. The batteries are remarkably long-lasting, and the MyAir system shows their remaining charge. Quick quideMeasuresWith battery
With power supply
DimensioningNot intended for adjusting. MyAir-100MyAir-125MyAir valve tehcnical dataProsessor and memory ARM Cortex-M4, 256k FLASH, 64k RAM MyAir measurementsTemperature, area 0 to +60 °C Humidity, area 0 to 100% rH Static pressure, area 260-1260 hPa Central unitThe central unit controls MyAir valves based on the collected data. It is ideally placed centrally to the valves, into a room with no public access. Technical dataProcessor and memory ARM9 32-bit, 400 MHz, 16K Data Cache, 16K Guide Cache, 128×16 DDR RAM, 256MB Flash-memory SurroundingsUsage temperature -10 – +60C |