Snow and rain cover TUISKU-VU

TUISKU-VU is a snow and rain cover to prevent snow and water from entering intake air vents.

Installation method

Flush mounting

Surface treatment

Corrosivity category C4

Direction of vanes

Horizontal vanes

Material

Galvanized steel + painting, Marine aluminium + painting, Stainless steel + painting, Acid resistant steel + painting, Corten steel, Copper, Brass

Select the right size louvre by airflow

Description

TUISKU-VU is a flush mounted snow and rain cover with horizontal vanes. The horizontal vanes give an architecturally pleasing appearance without compromising robust structure and good airflow.

Tuisku materials:

  • Galvanized steel (ZnFe)
  • Painted (Ma)
  • Stainless (RFe)
  • Acid resistant (HFe)
  • Sheet copper (Cu)

The surface treatment of TUISKU fulfills the corrosivity category C4 that lasts well in even the most challenging climate conditions.

Larger than 2200×2000 mm units are made of two or more sections joined together.

Individually dimensioned (non-standard) sizes are possible. Please confirm the available size options from Climecon’s technical support.

Note:

TUISKU has an inclined bottom and water runs out from the front of the louver. In TUISKU-PU and TUISKU-VU air intake is executed from the front surface of the louver.

The recommended face air velocity is 0,7 m/s.

While placing the louver consider:

  • minimal effect of wind
  • do not place the device near complex constructs or surfaces where snow is easily built-up

Product code

TUISKU VU 1000×1000 ZnFe L MA RR40 KLV 800×800
1 2
  3
  4
  5
  6
  7
8
9

 


1 = Product
2 = VU = Horizontal vanes, flush-mounted model
PS
= Vertical vanes, with side vanes, surface model
P = Vertical vanes, no side vanes, surface model
V = Horizontal vanes, no side vanes, surface model
VS = Horizontal vanes, with side vanes, surface model
PU = Vertical vanes, flush-mounted model
3 = Size (L x H) mm
4 =Material
ZnFe  galvanized steel
RFe stainless steel
HFe acid resistant steel
Cu sheet copper
5 = Installation frame
6 = Painting
7 = Colour according to RR or RAL colour chart
8 = Rear connection, Note! only flush-mounted models
9 = 
Rear connection size (A x B) mm, defined by designer

TUISKU-VU Dimensions

The smallest available special size or special scale of the TUISKU snow cover is 300×400.

Dimensioning

TUISKU-VU-1000

TUISKU-VU-1200

TUISKU-VU-1400

TUISKU-VU-1600

TUISKU-VU-1800

TUISKU-VU-2000

TUISKU-VU-2200