ROX Düsenkanal

Finnisches Design mit zugfreier Luftverteilung. Der ROX Düsenkanal von Climecon ist eine perfekte Anlage für die Lüftung in Schulen, Kindertagesstätten und anderen öffentlichen Gebäuden.

Luftmenge

15-550 dm³/s, 54-1980 m³/h

Kanalgrößen

Ø 160-500 mm

Optiflow® produkt

Ja

Nachhaltiges Produkt

CO2-Fußabdruck berechnet, Düsen aus Biokomposit-Material, RTS EPD verifiziert

Beschreibung

Der Produktumfang beinhaltet ein aktives und wandelbares Zuluftelement (ROX), eine genaue und nutzerfreundliche Einstellungskomponente (-S) sowie ein nicht perforiertes Verlängerungselement (ROX-0).

ROX ist mit der einzigartigen ausrichtbaren CliMix®-Düse ausgestattet, die ein zu 100 % wandelbares Verteilermuster und ein hohes Mischverhältnis bietet. Die Änderung des Verteilermusters von ROX lässt sich bei Raumumgestaltungen leicht vollziehen, indem die Düsen mit dem mitgelieferten Einstellwerkzeug in die gewünschte Richtung ausgerichtet werden. Durch die einzigartige Konstruktion der CliMix®-Düsen bleibt die Fläche des Düsenkanals völlig sauber.

ROX ist ein Teil der OptiFlow®-Produktfamilie!

OptiFlow®-Produkte können dank ihres optimierten und flexiblen Verteilermusters den Veränderungen im Raum angepasst werden.

Stilvolles Gesamtbild

Die in die Fläche des ROX eingelassenen Düsen erzeugen eine homogene, stilvolle und leicht zu reinigende Einheit. Neben der Standardfarbe RAL 9016 weiß ist ROX auf Anfrage auch in anderen Farben erhältlich.

Fortschrittliches Regel- und Dämpferelement

Der im ROX-S enthaltene fortschrittliche Regel- und Dämpferelement hält Störungen äußerst robust stand. Mit dem Regelelement kann der Luftstrom auch bei kleinen Luftzügen und Kanalgeschwindigkeiten genau eingestellt werden (± 5%). Die Formgebung von ROX-S lässt sich hervorragend mit ROX kombinieren, wodurch eine stilvolle Einheit gebildet wird.

 

 

CO2-Fußabdruck

ROX

ROX-S

Applications

Particularly suitable for rooms in which large draftless and quiet amounts of air are required, such as:

  • Schools and kindergartens
  • Canteens and restaurants
  • Museums and lecture halls
  • Laboratories
  • Industrial premises
  • Also the premises where the intended use or the space arrangements may change during the product’s lifecycle

 

Quick guide

ROX 160

ROX 200

ROX 250

ROX 315

ROX 400

ROX 500

ROX-S + ROX 160

NOTE! In the model 90-R-1500 purple area = 5Pa – 40Pa ≤ 38dB (A)

ROX-S + ROX 200

NOTE! In the model 90-R-1500 purple area = 5Pa – 40Pa ≤ 38dB (A)

ROX-S + ROX 250

NOTE! In the model 90-R-1500 purple area = 5Pa – 40Pa ≤ 38dB (A)

ROX-S + ROX 315

NOTE! In the model 90-R-1500 purple area = 5Pa – 40Pa ≤ 38dB (A)

Product code

A stylish package

ROX is the most stylish nozzle duct in the market that is equipped with the directable nozzles. The clean, flat surface of ROX is easy to keep clean. The nozzle unit ROX, adjustment and damper unit ROX-S as well as the extension part ROX-0 form a coherent and stylish package.

Unique CliMix® nozzles

ROX is equipped with the most advanced CliMix® nozzles in the market, which combine 100% adjustable throw pattern and a high induction rate, i.e., good miscibility with the room air.

Superior functioning of CliMix® nozzles is based on two technologies, as a result of which:

 

1. The supply air mixes efficiently with the room air, which in turn will level the room temperature differences and reduces the flow velocities in the living zone.

 

2. The ingenious structure of CliMix® nozzles prevents
the air flow jet from hitting the surface of product
, which prevents the dirt particles in the secondary air from sticking to the surface of the product.

Pleasant and draught-free indoor air

Thanks to the high mixing ratio, pleasant and even indoor air is achieved with ROX. CliMix® nozzles allow the supply air to be distributed evenly and at a low speed over a wide area.

Supply air is evenly distributed over a wide area into the room

Throw patterns

The throw pattern of ROX is easy to change in connection with the rearrangement of the space

 

Standard throw pattern in which all the nozzles are turned upwards.

 

Long and narrow throw pattern. The uppermost nozzle row is directed downwards and the other nozzles straight up.

 

360° degrees diffusive throw pattern. The nozzles directed both upwards and 45° to the sides.

 

Throw pattern diagonally directed towards the air inlet direction. The nozzles directed at 45 ° diagonally upward toward the air inlet.

Throw lengths

ROX 160

ROX 200

ROX 250

ROX 315

ROX 400

ROX 500

Throw patterns

Standard throw pattern L0,2 (All nozzles directed upwards)

 

The throw pattern, where the nozzles are directed at an angle of 45° degrees and 90° degrees

A0,2 = L0,2 x 0,6

B0,2 = L0,2 x 0,8

Impact of the installation height (from the ceiling) on the throw length

L0,2KR = L0,2 x KR

Installation distances

A = the minimum installation distance

H < 3,5 m

A = 2 x (L0,2 x 0,7)

H > 3,5 m

A = 2 x (L0,2 x 0,6)

A = the minimum installation distance

H < 3,5 m
A = L0,2 x 0,8

H > 3,5 m
A = L0,2 x 0,7

ROX-S adjustment and damper unit

ROX-S adjustment unit based on the static pressure difference measurement enables highly accurate air flow measurement and control. The adjustment unit allows a precise adjustment of airflow (± 5%) even at low airflows and duct speeds. ROX-S forms an openable clean-out hatch.

ROX-S is very easy to adjust

 

1. The pressure difference is measured from the measuring socket of the control unit.

 

2. This adjustment can be made by a screwdriver. The adjustment is done by rotating the control dial with the tool. The control dial readings correspond to separate k-values ​​that can be found on the side of the adjustment unit.

 

3. The adjustment position can be locked with a screw.

Safety distances

ROX-S works accurately and reliably even at short safety distances. Due to steady pressure distribution the throw pattern is steadily and reliably directable.

Principle of operation

To achieve an even air distribution, ROX is available in four different air supply sectors.

90 R = The throw pattern in only one direction. Optimized for smaller airflows and duct velocities.

90 RR = The throw pattern in only one direction. Optimized for larger airflows and duct velocities.

180 R = The throw pattern in both directions of the product. Optimized for smaller airflows and duct velocities.

180 RR = The throw pattern in both directions of the product. Optimized for larger airflows and duct velocities.

Duct velocities

ROX functions excellently also at higher duct velocities. The throw pattern can be directed precisely in the desired direction up to 4 m/s duct velocities while keeping the sound level low. Technically ROX also works well with even higher duct velocities.

 

The Coanda effect

In measurement, please also take into account the sufficient pressure drop. This will ensure the emergence of a Coanda effect, which ensures evenly spread and well mixing of the supply air. In this case, ROX operate as planned also at low-temperature supply air. The recommended minimum pressure drop is 5 Pa.

Dimensions

ROX dimensions

ROX-S dimensions

Selection diagrams

ROX 160

 

ROX-S + ROX 160-90-R-1500

 

ROX-S + ROX 160-90-RR-1500 and ROX-S + ROX 160-90-R-3000/4500/6000

 

ROX-S + ROX 160-90-RR-3000/4500/6000 and ROX-S + ROX 160-180-R-1500

 

ROX-S + ROX 160-180-R-3000/4500/6000 and ROX-S + ROX 160-180-RR-1500

 

ROX-S + ROX 160-180-RR-3000/4500/6000

 

ROX 200

 

ROX-S + ROX 200-90-R-1500

 

ROX-S + ROX 200-90-RR-1500 and ROX-S + ROX 200-90-R-3000/4500/6000

 

ROX-S + ROX 200-90-RR-3000/4500/6000

 

ROX-S + ROX 200-180-R-1500

 

ROX-S + ROX 200-180-RR-1500 and ROX-S + ROX 200-180-R-3000/4500/6000

 

ROX-S + ROX 200-180-RR-3000/4500/6000

 

ROX 250

 

ROX-S + ROX 250-90-R-1500

 

ROX-S + ROX 250-90-RR-1500 and ROX-S + ROX 250-90-R-3000/4500/6000

 

ROX-S + ROX 250-90-RR-3000/4500/6000

 

ROX-S + ROX 250-180-R-1500

 

ROX-S + ROX 250-180-RR-1500 ja ROX-S + ROX 250-180-R-3000/4500/6000

 

ROX-S + ROX 250-180-RR-3000/4500/6000

ROX 315

 

ROX-S + ROX 315-90-R-1500

 

ROX-S + ROX 315-90-RR-1500

 

ROX-S + ROX 315-180-R-1500 and ROX-S + ROX 315-90-R-3000/4500/6000

 

ROX-S + ROX 315-180-R-3000/4500/6000

 

ROX-S + ROX 315-180-RR-1500 and ROX-S + ROX 315-90-RR-3000/4500/6000

 

ROX-S + ROX 315-180-RR-3000/4500/6000

 

ROX 400

 

ROX 500

Installation and maintenance

Installation of ROX can be easily performed with the help of the mounting rail attached to the product. The threaded rod is mounted to the counter-thread base in the rail which can be moved in a longitudinal direction. The fine adjustment of the installation height can still be carried out before locking the fastener.

The rotating counter thread rivets located on the mounting rail move freely so that the longitudinal direction mounting position is freely selectable. The rotatable counter thread rivets allow for a very simple and quick mounting and fine adjustment of the height.

Due to the mounting rail, ROX is also easy to carry to the site.

 

The flat and smooth surface of ROX is quick and easy to clean. Due to the openable end part, the product is also easy to clean on the inside. ROX-S adjustment unit operates as an openable cleaning hatch.

K values